ANÁLISE RESISTIVA DE DIFERENTES ESTRUTURAS DE PONTES CONFECCIONADAS EM CARBOIDRATOS

Ariston Da Silva Melo Junior, Marcelo Nogueira, Fábio Sevegnani

Abstract


The present work is the analysis function of bridge structures in noodles prepared didactically with to students of engineering at the University Paulista. The procedure involved the preparation of 70 bridges that have undergone compression and tensile test in the laboratory on the campus of the University itself Vila. It was observed that 90% of the models supported an average load of 12 kgf, and the length of the models which bore the cargo in the linear range was 100 to 110 cm. By analyzing the variation in height of each of the bridges noodle model and its relation to axial load of tensile / compression, it may be noted that the height of the bridges has not had a great influence on the increase of the resistance load. Regarding the average height of bridges, 90% of the models supported an average load of 12 kgf. This finding showed that the action of the traction force on the upper beams of noodles was not so relevant when comparing with the compression that the basis of the models could bear. Key words - traction, bridge and resistivity.

Full Text: PDF

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution 3.0 License.

----------------------------------------------------------------------

ISSN 2319-0507

----------------------------------------------------------------------

Indexing

Logotipo do IBICT

----------------------------------------------------------------------

Scientific Societies and Directories

Logotipo COPEC Logotipo SHERO Logotipo da Capes

----------------------------------------------------------------------

Follow Us

Logotipo facebook Logotipo LinkedIn Logotipo Twitter